backup> backup: Command line too long
backup> backup> Commands are:
adddump         add dump schedule
addhost         add host to config
addvolentry     add a new volume entry
addvolset       create a new volume set
apropos         search by help text
dbverify        check ubik database integrity
deldump         delete dump schedule
deletedump      delete dumps from the database
delhost         delete host to config
delvolentry     delete a volume set sub-entry
delvolset       delete a volume set
diskrestore     restore partition
dump            start dump
dumpinfo        provide information about a dump in the database
help            get help on commands
interactive     enter interactive mode
jobs            list running jobs
kill            kill running job
labeltape       label a tape
listdumps       list dump schedules
listhosts       list config hosts
listvolsets     list volume sets
quit            leave the program
readlabel       read the label on tape
restoredb       restore backup database
savedb          save backup database
scantape        dump information recovery from tape
setexp          set/clear dump expiration dates
status          get tape coordinator status
volinfo         query the backup database
volrestore      restore volume
volsetrestore   restore a set of volumes
backup> Tape hosts:
    Host tangent.citi.umich.edu, port offset 0
backup> /full 
    /wek1 
        /daily 
    /wek2 
        /daily 
    /wek3 
        /daily 
    /daily 
backup> Volume set all:
    Entry   1: server babylon.citi.umich.edu, partition .*, volumes: .*\.backup

Volume set changing:
    Entry   1: server .*, partition .*, volumes: user\..*\.backup
    Entry   2: server .*, partition .*, volumes: honey\..*\.backup
    Entry   3: server .*, partition .*, volumes: project\..*\.backup
    Entry   4: server .*, partition .*, volumes: projects\..*\.backup
    Entry   5: server .*, partition .*, volumes: afs33\..*\.backup
    Entry   6: server .*, partition .*, volumes: citi\..*\.backup
    Entry   7: server .*, partition .*, volumes: i386_obsd41\..*\.backup
    Entry   8: server .*, partition .*, volumes: openafs\..*\.backup

backup> Database OK
backup> backup> backup> backup> backup> backup> backup> backup> backup> backup> Commands are:
adddump         add dump schedule
addhost         add host to config
addvolentry     add a new volume entry
addvolset       create a new volume set
apropos         search by help text
dbverify        check ubik database integrity
deldump         delete dump schedule
deletedump      delete dumps from the database
delhost         delete host to config
delvolentry     delete a volume set sub-entry
delvolset       delete a volume set
diskrestore     restore partition
dump            start dump
dumpinfo        provide information about a dump in the database
help            get help on commands
interactive     enter interactive mode
jobs            list running jobs
kill            kill running job
labeltape       label a tape
listdumps       list dump schedules
listhosts       list config hosts
listvolsets     list volume sets
quit            leave the program
readlabel       read the label on tape
restoredb       restore backup database
savedb          save backup database
scantape        dump information recovery from tape
setexp          set/clear dump expiration dates
status          get tape coordinator status
volinfo         query the backup database
volrestore      restore volume
volsetrestore   restore a set of volumes
backup> backup> backup> backup> backup> backup> Tape coordinator is idle
backup> Tape coordinator is idle
backup> Starting dump of volume set 'all' (dump level '/full')
No volumes to dump
backup> backup> Volume set all:
    Entry   1: server babylon.citi.umich.edu, partition .*, volumes: .*\.backup

Volume set changing:
    Entry   1: server .*, partition .*, volumes: user\..*\.backup
    Entry   2: server .*, partition .*, volumes: honey\..*\.backup
    Entry   3: server .*, partition .*, volumes: project\..*\.backup
    Entry   4: server .*, partition .*, volumes: projects\..*\.backup
    Entry   5: server .*, partition .*, volumes: afs33\..*\.backup
    Entry   6: server .*, partition .*, volumes: citi\..*\.backup
    Entry   7: server .*, partition .*, volumes: i386_obsd41\..*\.backup
    Entry   8: server .*, partition .*, volumes: openafs\..*\.backup

backup> backup> Volume set all:
    Entry   1: server babylon.citi.umich.edu, partition .*, volumes: .*\.backup

Volume set changing:
    Entry   1: server .*, partition .*, volumes: user\..*\.backup
    Entry   2: server .*, partition .*, volumes: honey\..*\.backup
    Entry   3: server .*, partition .*, volumes: project\..*\.backup
    Entry   4: server .*, partition .*, volumes: projects\..*\.backup
    Entry   5: server .*, partition .*, volumes: afs33\..*\.backup
    Entry   6: server .*, partition .*, volumes: citi\..*\.backup
    Entry   7: server .*, partition .*, volumes: i386_obsd41\..*\.backup
    Entry   8: server .*, partition .*, volumes: openafs\..*\.backup

backup> Commands are:
adddump         add dump schedule
addhost         add host to config
addvolentry     add a new volume entry
addvolset       create a new volume set
apropos         search by help text
dbverify        check ubik database integrity
deldump         delete dump schedule
deletedump      delete dumps from the database
delhost         delete host to config
delvolentry     delete a volume set sub-entry
delvolset       delete a volume set
diskrestore     restore partition
dump            start dump
dumpinfo        provide information about a dump in the database
help            get help on commands
interactive     enter interactive mode
jobs            list running jobs
kill            kill running job
labeltape       label a tape
listdumps       list dump schedules
listhosts       list config hosts
listvolsets     list volume sets
quit            leave the program
readlabel       read the label on tape
restoredb       restore backup database
savedb          save backup database
scantape        dump information recovery from tape
setexp          set/clear dump expiration dates
status          get tape coordinator status
volinfo         query the backup database
volrestore      restore volume
volsetrestore   restore a set of volumes
backup> /full 
    /wek1 
        /daily 
    /wek2 
        /daily 
    /wek3 
        /daily 
    /daily 
backup> Starting dump of volume set 'all' (dump level '/full')
No volumes to dump
backup> Tape coordinator is idle
backup> Volume set all:
    Entry   1: server babylon.citi.umich.edu, partition .*, volumes: .*\.backup

Volume set changing:
    Entry   1: server .*, partition .*, volumes: user\..*\.backup
    Entry   2: server .*, partition .*, volumes: honey\..*\.backup
    Entry   3: server .*, partition .*, volumes: project\..*\.backup
    Entry   4: server .*, partition .*, volumes: projects\..*\.backup
    Entry   5: server .*, partition .*, volumes: afs33\..*\.backup
    Entry   6: server .*, partition .*, volumes: citi\..*\.backup
    Entry   7: server .*, partition .*, volumes: i386_obsd41\..*\.backup
    Entry   8: server .*, partition .*, volumes: openafs\..*\.backup

backup> /full 
    /wek1 
        /daily 
    /wek2 
        /daily 
    /wek3 
        /daily 
    /daily 
backup> backup> backup> Tape coordinator is idle
backup> backup> backup> backup> Tape coordinator is idle
backup> backup> backup> Job 1: Labeltape (all.full.1) finished
Starting dump of volume set 'all' (dump level '/full')
No volumes to dump
backup> backup> /full 
    /wek1 
        /daily 
    /wek2 
        /daily 
    /wek3 
        /daily 
    /daily 
backup> Volume set all:
    Entry   1: server babylon.citi.umich.edu, partition .*, volumes: .*\.backup

Volume set changing:
    Entry   1: server .*, partition .*, volumes: user\..*\.backup
    Entry   2: server .*, partition .*, volumes: honey\..*\.backup
    Entry   3: server .*, partition .*, volumes: project\..*\.backup
    Entry   4: server .*, partition .*, volumes: projects\..*\.backup
    Entry   5: server .*, partition .*, volumes: afs33\..*\.backup
    Entry   6: server .*, partition .*, volumes: citi\..*\.backup
    Entry   7: server .*, partition .*, volumes: i386_obsd41\..*\.backup
    Entry   8: server .*, partition .*, volumes: openafs\..*\.backup

backup> Tape hosts:
    Host tangent1.eecs.umich.edu, port offset 0
backup> backup> Tape hosts:
    Host tangent1.eecs.umich.edu, port offset 0
backup> /full 
    /wek1 
        /daily 
    /wek2 
        /daily 
    /wek3 
        /daily 
    /daily 
backup> backup> backup> Tape hosts:
    Host tangent1.eecs.umich.edu, port offset 0
backup> Tape hosts:
    Host tangent1.eecs.umich.edu, port offset 0
backup> Tape hosts:
    Host tangent1.eecs.umich.edu, port offset 0
backup> Starting dump of volume set 'all' (dump level '/full')
No volumes to dump
backup> backup> backup> Starting dump of volume set 'all' (dump level '/full')
No volumes to dump
backup> Starting dump of volume set 'all' (dump level '/full')
No volumes to dump
backup> backup> backup> Starting dump of volume set 'all' (dump level '/full')
No volumes to dump
backup> backup> Volume set all:
    Entry   1: server babylon.citi.umich.edu, partition .*, volumes: .*\.backup

Volume set changing:
    Entry   1: server .*, partition .*, volumes: user\..*\.backup
    Entry   2: server .*, partition .*, volumes: honey\..*\.backup
    Entry   3: server .*, partition .*, volumes: project\..*\.backup
    Entry   4: server .*, partition .*, volumes: projects\..*\.backup
    Entry   5: server .*, partition .*, volumes: afs33\..*\.backup
    Entry   6: server .*, partition .*, volumes: citi\..*\.backup
    Entry   7: server .*, partition .*, volumes: i386_obsd41\..*\.backup
    Entry   8: server .*, partition .*, volumes: openafs\..*\.backup

backup> Volume set all:
    Entry   1: server babylon.citi.umich.edu, partition .*, volumes: .*\.backup

Volume set changing:
    Entry   1: server .*, partition .*, volumes: user\..*\.backup
    Entry   2: server .*, partition .*, volumes: honey\..*\.backup
    Entry   3: server .*, partition .*, volumes: project\..*\.backup
    Entry   4: server .*, partition .*, volumes: projects\..*\.backup
    Entry   5: server .*, partition .*, volumes: afs33\..*\.backup
    Entry   6: server .*, partition .*, volumes: citi\..*\.backup
    Entry   7: server .*, partition .*, volumes: i386_obsd41\..*\.backup
    Entry   8: server .*, partition .*, volumes: openafs\..*\.backup

backup> backup> Commands are:
adddump         add dump schedule
addhost         add host to config
addvolentry     add a new volume entry
addvolset       create a new volume set
apropos         search by help text
dbverify        check ubik database integrity
deldump         delete dump schedule
deletedump      delete dumps from the database
delhost         delete host to config
delvolentry     delete a volume set sub-entry
delvolset       delete a volume set
diskrestore     restore partition
dump            start dump
dumpinfo        provide information about a dump in the database
help            get help on commands
interactive     enter interactive mode
jobs            list running jobs
kill            kill running job
labeltape       label a tape
listdumps       list dump schedules
listhosts       list config hosts
listvolsets     list volume sets
quit            leave the program
readlabel       read the label on tape
restoredb       restore backup database
savedb          save backup database
scantape        dump information recovery from tape
setexp          set/clear dump expiration dates
status          get tape coordinator status
volinfo         query the backup database
volrestore      restore volume
volsetrestore   restore a set of volumes
backup> Tape hosts:
    Host tangent1.eecs.umich.edu, port offset 0
backup> Tape coordinator is idle
backup>