# $XConsortium: XF86Conf.cpp,v 1.5 95/01/16 13:16:10 kaleb Exp $ # $XFree86: xc/programs/Xserver/hw/xfree86/XF86Conf.cpp,v 3.15 1995/12/26 06:03:28 dawes Exp $ # # Copyright (c) 1994 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. This man page is installed as /usr/X11R6/man/cat5/XF86Config.0 # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # DontZoom EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" AutoRepeat 500 20 # Let the server do the NumLock processing. This should only be required # when using pre-R6 clients # ServerNumLock # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAlt Meta RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock # These are the default XKB settings for XFree86 # XkbRules "xfree86" # XkbModel "pc101" # XkbLayout "us" # XkbVariant "" # XkbOptions "" # XkbKeymap "xfree86(us)" XkbDisable EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" Protocol "BusMouse" Device "/dev/pms0" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Emulate3Buttons # Emulate3Timeout 50 # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Generic Monitor" VendorName "Unknown" ModelName "Unknown" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. Bandwidth 75 HorizSync 10-100 VertRefresh 10-100 # HorizSync 31.5 # typical for a single frequency fixed-sync monitor # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. # VertRefresh 60 # typical for a single frequency fixed-sync monitor # VertRefresh 50-100 # multisync # VertRefresh 60, 65 # multiple fixed sync frequencies # VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz) # These two are equivalent # ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525 ModeLine "640x480" 28 640 648 744 796 480 487 489 509 ModeLine "640x480" 31 640 664 704 832 480 489 492 520 Modeline "800x600" 50 800 880 1000 1032 600 637 643 666 +hsync +vsync #ModeLine "800x600" 50.42 800 840 960 1052 600 601 607 626 +hsync +vsync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device" # Built-in VGA Identifier "Generic SVGA" VendorName "Unknown" BoardName "Unknown" # VideoRam 2048 EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The colour SVGA server Section "Screen" Driver "svga" Device "Generic SVGA" Monitor "Generic Monitor" Subsection "Display" Depth 16 Modes "800x600" "640x480" ViewPort 0 0 Virtual 800 600 EndSubsection EndSection